Cadillac 2006 CTS-V User Manual

Page 199

Programmable Modes

Mode 1: ON

Mode 2: OFF

Before your vehicle was shipped from the factory, it was
programmed to Mode 2. The mode to which the vehicle
was programmed may have been changed since it
left the factory.

To program the vehicle to a different mode, use the
following procedure:

1. Enter the personalization portion of the SETUP

menu following the instructions listed previously.

2. Turn the TUNE/SEL knob until REMOTE EXIT

RECALL is highlighted.

3. Press the TUNE/SEL knob to switch back and forth

between on and off.

When the mode is turned on, a check mark will
appear next to the feature name.

If this feature is selected, Remote Recall Memory
cannot be selected.

The mode you selected is now set. You can either exit
the programming mode by following the instructions
later in this section or program the next feature available
on your vehicle.

Key in Recall Memory

If your vehicle has the optional memory package, you
will have this feature. When this feature is turned on,
you can recall any previously programmed seat and
mirror positions when the key is inserted into the ignition.