Panasonic Ultra Pro MC-V300 - Manual (Page 7)

TO ASSEMBLE CLEANER
A
WARNING
Electrical Shock Hazard.
DO NOT plug Into electrical supply until assembly is complete. Failure to do so could
result in electrical shock or injury.
«rmCHING HANDLE TO VACUUM CLEANEFH*
The vacuum cleaner main body and handle are packed separately.
Handle
1. The handle screw has
been installed for shipping
purposes. Please remove
the screw before inserting the han­
dle. Insert the han­
dle as shown in the
illustration. Ensure
that the cord hook
is on the back side
of the handle
before inserting.
3. There is a recessed area
between the cord hook base and
the handle that is designed to
secure the power cord during vacu­
uming.
Always push the power cord down
into this recessed area to help
keep the power cord from hanging
near the nozzle and being dam­
aged by the agitator.
2. Insert the
screw that you
have removed.
Be sure the
screw is tight­
ened, but not
overtight­
ened.
4. Loosely wrap the power
cord around cord hook.
Secure the plug head to the
cord by pushing the power
cord into the retainer on
the plug head. Place
the cord wrap around
the bottom loop of
the cord.
-
7
-