Fabric ironing chart, High – Panasonic L71SR User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
FABRIC IRONING CHART
NOTES: 1. Check garment for specific ironing instructions. Always follow manufacturer's
instructions.
2. Iron blended fabrics at setting for lower-temperature fiber.
3. Use caution, some synthetics may melt at high temperature.
Temperature
Control Pad Setting
Fabric
Ironing Recommendations
LOW
ACRYLIC
* ACRILAN
* CRESLAN
* ORLON
ACETATE
METALLI CS
SUEDE
Dry iron on reverse side, or use a press cloth on
top of fabric. Don't sprinkle water directly on
fabric to avoid spots.
To iron suede, cover ironing board with brown
paper and use it as a press cloth.
NYLON
* ANTORON
*
CAPROLAN
SILK
Dry iron on reverse side.
MED
PERM.PRESS
RAYONS
POLYESTER
* DACRON
* FORTREL
* KODEL
TRIACETATE
* ARNEL
W'n W COTTON
Dry iron on reverse side. To touch-up collars,
cuffs, pockets, etc..., lightly iron the surface.
WOOL
VELVET
Steam ironing is suggested. Never iron until completely dry,
but leave it with a little moisture. To iron velvet, use steam
but do not let the iron touch the fabric. Hold it slightly above
the surface.
HIGH
COTTON
Steam ironing is suggested. Sprinkle water on the fabric,
depending on its thickness. Iron dark fabrics on reverse
side to avoid unwanted sheen.
LINEN
Steam ironing is suggested. Iron dark fabrics on reverse
side to avoid unwanted sheen.
Trademarks of Fiber Manufacturers.
Panasonic Consumer Electronics
Company, Division of Panasonic
Corporation of North America
One Panasonic Way, Secaucus,
New Jersey 07094
Panasonic Puerto Rico, Inc.
Ave.65 de Infanteria. Km. 9.5
San Gabriel Industrial Park, Carolina,
Puerto Rico 00985
© 2007 Matsushita Electric Industrial Co., Ltd. All rights reserved.
PWHAEIG 07 05-01
Printed in China
-12-