Panasonic TC-1471AR - Manual (Page 6)

General Operation
( Refer to diagram on page 2 )
(1) Programme Number Up and Down
Buttons
Push the Programme Number Up “A" Button
to select the higher programme numbers.
Push the Programme Number Down “ V ”
Button to select the lower programme num­
bers.
(2) Volume Up “ + ” and Down “ - ”
Buttons
Push the Volume Up “ + ” Button to increase
the sound level.
Push the Volume Down Button to de­
crease the sound level.
(3) Recall Button
Push the Recall Button to activate the
on-screen display.
The current programme number will be dis­
played.
(4) Contrast Control
Adjust for proper contrast level.
(5) Sharpness Control
Adjust for sharpness of the picture.
(6) Colour / Brightness Selection
Button
Push the Colour / Brightness Button.
The “CLR” or “BRT" indication will appear
on the screen. Push either the Up “ + ” or the
Down “ - ” Button to change the level of the
selected function as shown below.
(7) Vertical-Hold Control
Adjust this control if the picture rolls either
(8) AFC Button
Under normal reception conditions, the AFC
Button is not used.
However, in areas of poor reception or con­
stant interference, a slight adjustment of the
tuning may improve the picture and sound
quality.
How to set
1. Push the “PRE.” ( PRESET ) Button until
the on-screen display appears.
2. Push either the Tuning UP “ ▲ ” or
Down “ Button for slight adjustment.
3. Push the AFC Button, The “ ■ " symbol
appears at the left side of the programme
number on the screen.
AFC OFF symbol appears
4. Push the “PRE." ( PRESET ) Button again.
Colour function Brightness function
Push _
-
CLR BRT
:_________________J
Push again -------------h
a) Push the “ + ’’ Button to increase the
level of selected function level.
b) Push the “ - " Button to decrease the
level of selected function level.
5 —