Loading batteries introducción de las pilas – Panasonic EW-254 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Fig. 2
Figura 2
1. Lightly press the battery cover on the rear side of
the main unit, and push it in the direction of the
arrow.
__ _
Presione ligeramente la tapa de las pilas, ubicada en la parte trasera de la unidad
principal, y empújela en el sentido de la flecha.
2. Insert four AA (R6, SUM-3) batteries in the battery compartment, observing the
(+) and (*) signs to ensure correct polarity.
Introduzca cuatro pilas AA (R6, SUM-3) en el compartimiento de las pilas, colocando las
polaridades (+) y (-) en las posiciones correctas.
3. Firmly replace the battery cover.
Vuelva a poner firmemente la tapa de las pilas.
• Approximately 200 measurements can be taken with a new set of Panasonic
batteries (at an ambient temperature of 22 “C or 71.6 °F, pressurization of 150
mmHg).
Con
Lin
juego nuevo de pilas Panasonic (a una temperatura ambiental de 22 °C o 71,6 °F
y a una presionización de 150 mmHg) se pueden tomar aproximadamente 200 medidas.
Loading Batteries
Introducción de las pilas
Notes:
Notas:
• Do not mix old and new batteries.
No mezcle pilas nuevas y viejas.
• The batteries’ power output is impaired at low temperatures.
La potencia de salida de las pilas se reduce a bajas temperaturas.