Crimestopper Security Products CS-2000DP-TW2 - Manual (Page 8)

8
DATA PORT DIAGRAM
Data bus Systems: Data Controlled door locks, Factory Security and many accessories
Data bus systems send low current “Data messages” to the door lock controllers, BCM, and Factory security in
order to lock and unlock doors, Bypass factory security system and much more. To install aftermarket systems
in these vehicles, an interface module such as an OFA 10/20/30 is required to Interface with these systems.
Please see Data Port Diagram below.
This unit includes DP Technology it will allow you to plug our modules (model OFA-10/20/30) which operate
Data control Door locks, accessories, and Bypass Factory security systems directly into the unit by via Data
Port. The OFA module cable plugs directly to the Data port on the side of the unit. Please refer to OFA
module manual for detail instructions.
iDATA LINK CABLE
Data Port Module Not Included
OFA
Bypass
Module
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16
BCM
OBD connector
Data wire
Antenna Plug