Panasonic COMBI WAVE NE-C1153 - Manual (Page 20)

How to change the Beep Tone
When Program Lock is activated, you can not change the Beep Tone.
Please release the Program Lock. {See page 17.)
ACTION INFORMATION DISPLAY
1 open Door. The oven lamp will come on.
14lCi)0 TME PnOCAAM
CONV PWHEAT
2 Press
Program Key.
(^Prog)
Keep key pressed for 2 seconds until “P” is
displayed.
KEEP DOOR OPEN.
MCAO TIME PROCAAM
\ I
_D-
f
'' I
CONV PREHEAT
3 Press
Beep Key.
Press Beep Key to choose loudness and duration
required. (See below.)
(eg. twice)
MICRO TIME PRCK j A am
Beep^ CONV PREHEAT
4 Press
Program Key.
MICRO TIME PROGRAM
( Prog^
fL - J
J O
CONV PREHEAT A,
After 3 seconds
Display returns to “0”.
After 3 seconds
UtCRQ TIME PROGAAM
CCHV PRC.HEAT S
The loudness of Beep Tone and its duration at the end of heating cycle can be set.
There are four levels of the loudness and three levels of duration.
The 3b-1 is preset at the factory.
No.Presses Display loudness duration
1 3b-1 Loudest beeps for 60 seconds
2 3b-2 Loudest short beeps 3 times
3 3b-3 Loudest long beeps 3 times
4 2b-1 Middle beeps for 60 seconds
5 2b-2 Middle short beeps 3 times
6 2b-3 Middle long beeps 3 times
7 1b-1 Quietest beeps for 60 seconds
8 1b-2 Quietest short beeps 3 times
9 1b-3 Quietest long beeps 3 times
10 Ob Silent
-
20
-