Yamaha PSR-41 - Manual (Page 3)

2
Starting to play
Orchestra section
First, try the sounds in the Orchestra
section, which is a fundamental part of
this keyboard.
1. Switch on
Slide the POWER switch ® to the “ON”
position. The Power-on light will then
illuminate.
2. Adjust the volume
Slide the MASTER VOLUME control ®
about three-quarters of the way towards
Max. to set the volume level.
f
t
3. Choose an instrument voice
First set the Orchestra Bank selector @ for the desired bank of voices
(Orchestra Bank selector in upper position to select upper row of voices
labeled in silver above the voice selectors, lower position to select lower row
of voices labeled in yellow.) Then press the Orchestra Voice selector @ for
the desired voice in the selected bank.
• When you turn the keyboard ON, the BRASS 1 voice will automatically
be selected if the Orchestra Bank selector @ is set to the upper position,
and the BRASS 2 voice will be selected if the Orchestra Bank selector is
set to the lower position.
Woles:
1. Vibrato is automatically applied to voices v\fhich benefit from application of this effect.
2. Be sure to set the Auto Bass Chord MODE selector ® fo the OFF position. When the selector
is set to the SINGLE FINGER or FINGERED position, the keys in the Auto Bass Chord key
section
(7) cannot be used for melody playing.