CHEVROLET Tahoe - Manual (Page 533)

When your vehicle has a flat tire, use the following
example as a guide to assist you in the placement
of wheel blocks.
The following information will tell you how to use
the jack and change a tire.
Removing the Spare Tire and Tools
The equipment you will need to change a flat
tire is stored under the storage tray, which
is located on the driver’s side trim panel (over the
rear wheelhouse).
1. Remove the tray to access the tools by pulling
up on the finger depression under the jack
symbol.
Regular Wheelbase shown, Extended Wheelbase
similar.
533