Fabric ironing chart – Panasonic NI-N50NR User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
FABRIC IRONING CHART
NOTES: 1. Check garment for specific ironing instructions, Always follow manufacturer's
instructions.
2. Iron blended fabrics at setting for lower-temperature fiber or for the
highest-percentage fiber.
3. Use caution, some synthetics may melt at high temperature.
Temperature
Selector Setting
Fabric
Ironing Recommendations
1
ACRYLIC
* ACRILAN
* CRESLAN
* ORLON
ACETATE
METALLICS
SUEDE
Dry iron on wrong side, or use a press cloth on
top of fabric. Don't sprinkle water directly on
fabric to avoid spots.
To iron suede, cover ironing board with brown
paper and use it as a press cloth.
2
NYLON
* ANTORON
* CAPROLAN
SILK
Dry iron on wrong side.
3
PERM. PRESS
RAYONS
POLYESTER
* DACRON
* FORTREL
* KODEL
TRIACETATE
* ARNEL
W'n W COTTON
Dry iron on wrong side. To touch-up collars,
cuffs, pockets, etc., iron lightly on right side.
4
WOOL
VELVET
Steam ironing is suggested. Never iron completely dry.
To iron velvet, steam iron holding the slightly above the
fabric
5
COTTON
Steam ironing is suggested. Sprinkle water on the fabric,
depending on its thickness. Iron dark fabric on wrong
side to avoid unwanted sheen.
6
LINEN
Steam ironing is suggested. Iron dark fabrics on wrong
side to avoid unwanted sheen.
‘ Trademarks of Fiber Manufacturers.
Panasonic Consumer Electronics
Company, Division of Matsushita
Electric Corporation of America
One Panasonic Way Secaucus
New Jersey 07094
Panasonic Sales Company,
Division of Matsushita Electric of
Puerto Rico, Ink.CPSC)
Ave. 65 de Infanteria. Km. 9.5
San gabriel Industrial Pack, Carolina.
Puerto Rico 00985
consumerproducts @ panasonic.com
Ì8200O-5K32B
-10 -