Pip operation with a vcr and cable box, Picture in picture (pip) operation, Pip) o – Panasonic CT-32D20U User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
P
icture
iN P
icture
(PIP) O
peration
Picture In Picture (PIP) Operation
PIP Operation with a VCR and Cable Box
This television incjudes a Picture In Picture (PIP) feature. A second video source
(VCR, Camcorder, etc.) is required to provide a second picture.
Connect your television to a VCR and Cable Box, as shown.
TERMINALS ON BACK OF TV
VCR
CABLE BOX
Noto:
The Remote Control must be programmed with supplied codes to operate the VCR and Cable
Box. See Programming the Remote Control in the Remote Control Quick Reference Guide.
Procedure
Press the
PIP
button on the Remote Control to display the PIP frame.
Note; The PIP picture is the same as the main picture, initially.
To view a different picture in the PIP frame:
□
Press the TV/VIDEO button on the Remote Control to select the video PIP source.
O
Verify the CABLE BOX and VCR are ON and the VCR is tuned to channel 3.
O
Choose channels for the PIP frame by pressing the CBL button on the Remote Control and
using the numeric keypad or CH up/down buttons.
□
Choose channels for the Main Picture by pressing the TV button on the Remote Control
and using the numeric keypad or CH up/down buttons.
The SWAP button switches the PIP and Main
Picture source. Press the RECALL button for on
screen PIP and Main Picture source status.
w.