Panasonic WV-PS11B - Manual (Page 9)

Connect the coaxial cable between the camera
and CAMERA IN connector of the camera drive
unit. The approximate maximum cable length is as
follows:
Coaxial
Cable Type DC R/1000 ft. of
Inner Conductor
Maximum
Cable Length
RG-59/U
RG*6/U
Less than 30 ii
Less than 12 ii 200 m (660 ft.)
500 m (1650 ft.)
The maximum DC resistance of the cable between
the camera and camera drive unit is 20 Ti.
Note:
If the length of the coaxial cable between the
camera drive unit and the video monitor
exceeds the distance shown in the above
table, a cable loss compensator should be
used between the camera drive unit and the
video monitor.
After connecting the specified camera to the cam­
era drive unit, connect the audio cable between the
monitor and AUDIO OUT connector of the camera
drive unit.
2. Connect the coaxial cable between the video moni­
tor and VIDEO OUT connector of the camera drive
unit. The approximate maximum cable length is as
follows:
Type of
coaxial cable
RG-59/U
(3C-2V)
RG-6/U
(5C-2V)
RG-11/U
(7C-2V)
Recommended
Maximum
(m) 250 500 600
cable length
(ft) 825 1,650 1,980
External VD/SYNC Signal
Signal Level
The VD/SYNC IN connector accepts the VD or VS syn­
chronizing signal for external synchronization.
• VD: 4 V[p-p]/75 0
- 7 -