Panasonic KX-T2395D-W - Manual (Page 9)

PREPARATION
© Handset
©TONE Button:
Used to change the dialing
mode from pulse to tone
during a dialing operation.
@ REDIAL Button;
Used to redial the last dialed
phone number.
0 DIRECT CALL Buttons:
Used to store phone numbers
and to make calls using
one-touch dialing.
® REW (Rewind) Button:
Used to rewind the cassette
tape.
© MEMO/2 WAY Button:
Used to record a memo
message or a telephone
conversation.
© PWR/IN USE (Power/ln use)
Indicator
® ANS/CALLS (Answer/calls)
Indicator
(9) FLASH Button:
Used to access some of the
feature of your host PBX.
® MUTE Button:
Used when you do not want
your voice to be heard by the
other party. The voice of the
calling party will still be heard.
0 HOLD Button and Indicator;
Used to put the calling party
on hold during a conversation.
While holding, the indicator
flashes.
©MUTE/STORE (HOLD)
Indicator
® MIC (Microphone)
0SP-PHONE (Speakerphone)
Button and Indicator:
Used to make or answer a
phone call without using the
handset.
©CLEAR Button:
Used to clear the memory
while storing telephone
number.
©PAUSE Button;
Used to enter a pause in
phone numbers when
programming.
©LOWER Button:
Used to select the lower
memory location.
©STORE Button:
Used to store phone numbers
into memory.
©PROG (Program) Button:
Used to start and complete the
programming procedures.
® ANS SYS ON/OFF (Answer
System On/Off) Switch:
Used to turn on and off the
unit. The PWR/IN USE
indicator lights when the unit is
turned on.
©PLAYBACK/PAUSE Button:
Used to play back the
recorded Incoming Messages
and to stop the ICM tape
temporarily during ICM
playback.
@OGM PLAY Button:
Used to play the recorded
Outgoing Message.
©OGM REC Button:
Used to record the Outgoing
Message.
- 2 -