Panasonic KX-T2395D-W - Manual (Page 25)

TELEPHONE
Flash
The FLASH button is used to
access special telephone
services such as call waiting
service or call forwarding.
While having a conversation,
another party calls and you hear
a tone, press the FLASH button.
The first conversation is placed on
hold and the second call can be
answered. To speak to the first
caller again, press the FLASH
button again. (The second caller is
placed on hold.)
You may access some of
features of your host PBX using
the FLASH button in a dialing
operation.
Mute
The MUTE button is used when
you do not want your voice to be
heard by the other party. The
other party’s voice can be heard.
Press the MUTE button.
The MUTE/STORE indicator light
is on. To resume the
conversation, press the MUTE
button again.
Tone
Use the TONE button when you
have rotary telephone service.
Pressing it will allow you to
change from pulse to tone mode
during a dialing operation, and
enter special tones and codes to.
operate answering machines,
electronic banking services and
other special services.
Pause
The pause button is helpful in the
automatic dialing when accessing
an outside line. To use this
function, store “PAUSE" with the
telephone number into the
memory station beforehand.
While storing the telephone
number into the memory, one
pause is required when
waiting for an outside diai
tone.
Example:
Press once (3.5-second pause)
Press twice (7-second pause)
Combination diaiing
A telephone number with more
than 30 digits can be stored into
two memory stations. Dialing is
done as follows:
1. Lift the handset.
2. Press the direct call
button “1”.
3. Press the direct call
button “2”.
Instead of using two memory
stations, you can store a part of
the telephone number into one
. memory station, and the other
part can be dialed manually.
1. Lift the handset.
2. Press the station key, wait for
dialing to stop, then dial
manually.
- 1 8 -