With a vcr and cable box, Procedure, Pip) – Panasonic SUPERFLAT CT-27SF25 User Manual

Page 7: Picture in picture (pip) operation p

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Picture In Picture (PIP) Operation

icture

(PIP)

peration

With a VCR and Cable Box

This television includes a Picture In Picture (PIP) feature. A second video source

(VCR, Camcorder, etc.) is required to provide a second picture.

Connect your television to a VCR and Cable Box, as shown.

TERMINALS ON BACK OF TV

VCR

Note:

The Remote Control must be programmed with supplied codes to operate the VCR

and Cable Box. See

Programming the Remote Control

in the

Remote Control Quick

Reference Guide.

Procedure

Press the

PIP

button on the Remote Control to display the PIP frame.

Note:

The PIP picture is the same as the main picture, initially.

To view a different picture in the PIP frame:

•

Press the

TV/VIDEO

button on the Remote Control to select the video

PIP source.

•

Verify the CABLE BOX and VCR are turned on and the VCR tuned to

Channel 3 or 4,depending on the VCR.

" Choose channels for the

PIP

frame by pressing the

CBL

button on the

Remote Control and using the numeric keypad or

up/down buttons.

•

Choose channels for the

Main Picture

by pressing the

button on the

Remote Control and using the numeric keypad or

up/down buttons.

The SWAP button switches the PIP and Main

Picture source. Press the RECALL button for PIP

and Main Picture source status, on screen.