Cooler Master Sentinel Advance - Manual (Page 17)

15
WWW.CMSTORM.COM
Macro Recording
Move the cursor to the "record area", click on Start Record
to record keyboard and mouse instructions. After you've
finished recording, click Stop Record to enable macro
editing mode.
Note: After recording, users can edit each "Macro Line" by
selecting the recorded data in the left column.
Loop (released) : The recorded macro will be executed repeatedly when the assigned button is released. To stop execution,
simply perform the same button release.
One shot (released): The recorded macro will be executed once when the assigned button is released.
One shot (press): The recorded macro will be executed once when the assigned button is pressed.
Loop (hold): The recorded macro will be executed when the assigned button is pressed. Release to stop the execution.
Loop (press): The recorded macro will be executed repeatedly when the assigned button is pressed. To stop execution, simply
perform same button release.
There are 5 execution methods:
Click Move Up & Move Down to alter "Macro Line" position
Navigating Macro Data Priorities:
Click DELETE, to remove the selected "Macro Line".
Macro Data Removal:
Edit Macro Data and Time Delay:
Double click on the "Macro Line" and edit data
assignments and time delays.
"With time"
By activating this function, the time duration of each
button press, button release and time intervals
between each command will be automatically
registered and recorded.
"Insert"
By activating this function, keyboard and mouse input
recordings will be inserted after the selected "Macro
Line" of your choice.
A
B
C
D
E
F
G
A
B C
D E
F
G
Macro Recording and Editing
17