Measuring conditions – Leica Geosystems Leica DISTO A6 - User Manual User Manual
Page 14

11
Appendix
Leica DISTO™ A6 1.1.0 gb
D
GB
F
I
E
P
NL
DK
S
N
FIN
J
CN
RC
ROK
PL
H
RUS
CZ
* maximum deviation occurs under unfavourable conditions
such as bright sunlight or when measuring to poorly
reflecting or very rough surfaces. For distances over 30 m the
maximum deviation may increase to a maximum of ± 10 mm.
The Leica DISTO™ A6 is a product belonging to Radio
Equipment Class 1 (radiated power < 10 mW; opera-
ting at a frequency range of 2400 to 2483 MHz) in
accordance with the R&TTE Directive and in a harmo-
nised frequency band.
As it is a product belonging to Radio Equipment
Class 1 its use within EU countries is not subject
to any limitations.
Measuring Conditions
Measuring Range
At night, at dusk and when the target is shadowed
the measuring range without target plate is
increased.
Use a target plate to increase the measurement
range during daylight or if the target has a bad reflec-
tion.
Measuring Surfaces
Measuring errors can occur when measuring toward
colourless liquids (e.g. water) or dust free glass,
styrofoam or similar semi-permeable surfaces.
Aiming at high gloss surfaces deflects the laser beam
and measurement errors can occur.
Against non-reflective and dark surfaces the measu-
ring time can be increased.
IP rating
IP 54
splash proof, dust proof
Dimension
148 x 64 x 36 mm
Weight (with batteries)
270 g
Temperature range:
Storage
Operating
-25°C to +70°C
(-13°F to +158°F)
-10°C to +50°C
(-14°F to +122°F)