Leica Geosystems Leica mojoXact Plus - Manual (Page 79)

Leica mojoXact Plus, Correction Sources 79
4. At the Network RTK screen, enter the data provided by your Network Data Plan
(RTK) Provider, in the Host, Port, Username and Password fields.
5. To proceed with the configuration of Network RTK as the correction source,
select . The second Network RTK screen appears.
To return to the Correction Settings menu and not save the values entered at the
Network RTK screen, select .
The second Network RTK screen appears and the mojoXact Plus downloads a list
of available data streams from the network server. A stream is a combination of
correction format and base location.
6. Select a stream from the list.
Information about the stream appears on the right side of the screen.

The distance to the reference source shown on the right is a guide only and
may be incorrect. Some servers provide a virtual correction location that
can only be assigned to a location close to you once you have connected
to the data stream. Until that time, the reported distance is meaningless.