Casio SE-S300 - Manual (Page 91)

91
E
In case of power failure
If the power supply to the cash register is cut by a power failure or any other reason, simply wait for
power to be restored. The details of any ongoing transaction as well as all sales data in memory are
protected by the memory backup batteries. (This is the reason to install the batteries.)
• Power failure during a registration
The subtotal for items registered up to the power failure is retained in memory. You will be able to continue
with the registration when power is restored.
• Power failure during printing a read / reset report
The data already printed before the power failure is retained in memory. You will be able to issue a report when
power is restored.
• Power failure during printing of a receipt / journal
Printing will resume after power is restored. A line that was being printed when the power failure occurred is
printed in full.
• Other
The power failure symbol is printed and any item that was being printed when the power failure occurred is
reprinted in full.
Important!
Once receipt / journal printing or printing of a report starts, it can be stopped only by interruption of
power to the cash register.
Troubleshooting
When the L sign appears on the display
About the low battery indicator…
The following shows the low battery indicator.
If this indicator appears when you switch the cash register on, it can mean one
of three things:
•No memory backup batteries are loaded in the cash register.
•The power of the batteries loaded in the unit is below a certain level.
•The batteries loaded in the unit are dead.
Important!
Whenever the low battery indicator appears on the display, load a set of two new batteries as soon
as possible. If there is a power failure or you unplug the cash register when this indicator appears,
you will lose all of your sales data and settings.
BE SURE TO KEEP THE POWER CORD OF THE CASH REGISTER
PLUGGED IN WHENEVER YOU REPLACE THE BATTERIES.
T
roub
leshooting
INIT
llllllllll
RPT
AMOUNT
T1 T2 T3 T4 TOTAL CHANGE