Leica Geosystems Leica DISTO lite5 - Manual (Page 3)

3 How to Use the Instrument
DISTO lite
5
1.2.0 en
de
en
fr
it
es
pt
nl
da
sv
no
fi
jp
zh
ko
pl
hr
hu
ru
cz
el
How to Use the Instrument
Inserting / replacing the batteries
1 Depress the locking clip and Slide the end piece to
the right.
D5-Z3
2 Remove battery cover. Replace batteries.
appears on the display if battery voltage is too
low.
For type of battery, refer to Technical Data.
)
Fit batteries the right way round.
)
Use only Alkaline batteries.
3 Push in end piece and listen for locking click sound.
DISTO Switching on/off
Briefly press.
The illumination and Battery symbols are displayed until
the first key press.
The instrument can be switched off from any menu point.
)
The instrument switches off automatically after
90 seconds if no key is pressed.
Clear key
The clear key places the instrument in normal
mode, resp. sets it to zero (=Clear).
This is possible before or after a measurement or a
calculation is made.
While performing a calculation (area or volume) each
single measurement can be deleted and remeasured.
Illumination
Briefly press.
Illumination is switched on/off with a key press.
)
Illumination switches off after 30 seconds if no
key is pressed.