Leica Geosystems Leica DISTO D3 - Manual (Page 11)

7 Menu functions Leica DISTO™ D3 760498a en
EN
F
E
P
Menu functions
Settings
The menu allows settings to be altered and perma-
nently stored. After switching off the device or
replacing the batteries the settings are stored.
Navigation in the menu
The menu allows settings to be made at the user
level. The instrument can be specifically configured to
your personal requirements.
General description
button (pressed long) brings up the , the
set units and the symbol are displayed.
button (pressed short) pages through each
menu item. See figure {G}.
or button to make changes in menu items.
button (pressed short) brings up the next menu
item.
A long press on the button in the menu confirms
the new settings made in the submenu items .
Pressing the button for longer in the menu
allows you to quit the settings function without
saving.
Setting the unit for distance mea-
surements
The following units can be set:
Setting the unit for tilt measure-
ments
The following units can be set for tilt measurements:
Beep ( )
You can switch the beep on or off.
MENU
Distance Area Volume
1. 0.000 m 0.000 m² 0.000 m³
2. 0.000 0 m 0.000 m² 0.000 m³
3. 0.00 m 0.000 m² 0.000 m³
4. 0.00 ft 0.00 ft² 0.00 ft³
5. 0'00''
1
/
32
0.00 ft² 0.00 ft³
6. 0'00'' 1 /
16
0.00 ft² 0.00 ft³
7. 0'00''
1
/
8
0.00 ft² 0.00 ft³
8. 0.0 in 0.00 ft² 0.00 ft³
9. 0 1 /
32
in 0.00 ft² 0.00 ft³
10. 0 1 /
16
in 0.00 ft² 0.00 ft³
11. 0
1
/
8
in 0.00 ft² 0.00 ft³
Units for tilt
1. +/- 0.0°
2. 0.00%
BEEP