Dynon Avionics EMS-D10 Pilots Users Guide - Manual (Page 11)

EMS-D10 Pilot’s User Guide 3-1
User interaction takes place via the EMS-D120 main
display and the six buttons beneath. Note: buttons are
not labeled on actual product
1 2 3 4 5 6
3. PRODUCT OPERATION
After reading this section, you will be familiar with the basics of how to use your EMS-D10. For details regarding
specific procedures (e.g., adjusting display brightness, using the fuel computer, setting the clock, etc.) please refer to the
EMS Operation section.
Front Panel Layout
All normal operation of the EMS-D10 happens via the front panel. The
front panel contains buttons and a display.
 Buttons – There are six buttons on the front panel of the EMS-
D10. Throughout this guide, these buttons are referred to as one
through six, with button one being the leftmost and button six
being the rightmost. EMS-D10 buttons are used to turn the
instrument on and off, cycle between screens, scroll through
menus, and adjust instrument parameters.
 Display – The display shows engine parameters, menus, and data
obtained from other connected products.