Dynon Avionics Sonex/Waiex Pitch Kit - Manual (Page 8)

DYNON AVIONICS
Servo Mounting Instructions – Sonex/Waiex Pitch Kit 7
101865-000 Rev A
Linkage mount position force and travel
The diagram below illustrates the maximum travel and force available at each linkage mounting
point. As can be seen, the closer you mount the linkage to the shaft, the more force the servo can
deliver. However, this also means the travel of the arm is shorter. Again, ensure that the servo
arm is nowhere near going over-center throughout the entire range of the control system.
Modify mount position with caution and take all precautions to ensure that a near over center
condition cannot occur.
SERVO MOUNTING BRACKET DETAIL
Standard Arm
Max Linear Travel
A: 2.6”, B: 2.2”, C: 1.8”
Max Force @ 100% Torque
SV32 - A: 24lb, B: 29lb, C: 36lb
SV32-Weight 2lb
SV42-Weight 3lb
SV52-Weight 4lb