Dynon Avionics Sonex/Waiex Pitch Kit - Manual (Page 4)

DYNON AVIONICS
Servo Mounting Instructions – Sonex/Waiex Pitch Kit 3
101865-000 Rev A
SERVO INSTALLATION AND CONFIGURATION
The Sonex/Waiex pitch servo mounting kit includes a servo mounting bracket, fuselage floor
doubler, connecting hardware, and push rod required to complete the installation of the Dynon
pitch servo into a dual control Sonex/Waiex aircraft. All Dynon-supplied parts are shaded in the
installation illustration (Fig 1) to distinguish them from existing aircraft hardware and structure.
If the builder is attempting to install the servo in an aircraft configuration other than that shown,
modifications to the kit may be required.
SUGGESTED INSTALLATION PROCEDURE
INVENTORY
PARTS
ASSEMBLE
PUSHROD
ATTACH PUSHROD
TO CONTROL
STICK FRAME
INSTALL SERVO
FLOOR PLATE
INSTALL SERVO IN
MOUNTING BRACKET
ATTACH SERVO
TO PUSHROD
POSITION SERVO
ON FLOOR PLATE
DO YOU HAVE FULL
AND UNOBSTRUCTED
MOVEMENT?
INSTALL SERVO
MOUNTING BRACKET
TO FLOOR PLATE
SERVO
CALIBRATION
NO
YES
Read Instructions
Complete