Dynon Avionics D2 Pilots User Guide - Manual (Page 41)

D2 Pilot’s Guide 11-1
11. TROUBLESHOOTING
Problem Description Possible Cause Solution
The D2 does not power on Battery is
completely
discharged Charge the battery; Additionally, the
D2 will automatically power on
when external power is applied via
the power port on the right side of
the unit
The brightness is
turned all the way
down Move the Rocker up to brighten the
display
Alternatively, power cycle the D2.
The D2 always turns on at a
brightness setting that is high
enough to see
The unit needs to be
reset Plug the unit into external power
Insert a paperclip or other similar
tool in the small round RESET button
hole on the left side of the unit
The D2 does not power on,
even when power is
applied to the charging port
on the right side of the unit D2 may be damaged Contact Dynon Avionics technical
support staff