Dynon Avionics D2 Pilots User Guide - Manual (Page 20)

Product Tour
4-6 D2 Pilot’s Guide
Figure 11 - Battery Charge Level / External Power Source Icons
Load Factor (G Meter) is determined by accelerometers and displayed as an analog-style gauge.
Configurable settings are provided for the color coded (red/yellow) ranges for both positive and
negative G loads.
The D2 Load Factor (G meter)
display has two selectable ranges
to meet the needs of Normal
Category aircraft and Aerobatic
Category aircraft.
The caution (yellow) and warning
(red) ranges are selectable from
the settings menu in 0.1 G steps.
The yellow range will always end
at the start of the red range. The
default values are shown.
Maximum positive and negative
G loads are displayed and may be
reset by pressing in on the jog
wheel on the right side.
Figure 12 – Load Factor (G meter) Display