ClearSounds AMPLIFIED FREEDOM PHONE WITH FULL CLEARDIGITAL POWER CSC1000 - Manual (Page 51)

51 – ENGLISH
Can’t be heard by other party
1. Check that all phone cord connections are securely plugged
into the telephone and wall jack.
2. Make sure extension phones are on the hook at the same
time you’re using the phone. It is normal for the volume
to drop when additional extension phones are used at
the same time.
Noise, Static, Interference while using the phone
1. A filter may be required for home with DSL line or near
Radio towers.
2. Make sure the AC adapter is not plugged into the wall
outlet with other appliances.
3. Try relocating the phone to another location.
No numbers dialed when memory button is pressed
1. No number stored in that memory button.
2. Make sure phone number was programmed and saved
(pages 25-26).
3. Make sure programming is done in the correct dialing
mode (touch-tone or pulse).
Caller ID information does not show
1. Make sure you are subscribed to Caller ID service through
your local phone company.
No Caller ID information while on a call
1. Make sure you service provides Caller ID information
while you are on a call. This is sometimes known as
“Caller ID on Call Waiting” or “Type II Caller ID”.
2. The phone cannot display the information if another
phone on the same line is in use.