ClearSounds A1600E - Manual (Page 10)

10 – ENGLISH
█
Turning the Handset “Power On/Off” Mode
The A1600E handset can be turned to “Power Off” mode,
which can be a convenient way to prevent the phone from
ringing without having to change the ringer setting. When you
turn the handset to “Power Off” mode, calls can’t be made or
received until you turn the power back “On”.
In Standby Mode (not during a live call):
1. To turn the handset “Off”, simply press and hold
until the display turns off.
2. To turn the handset “On”, you can either:
3. Place the handset back into the base and the handset will
automatically power on.
4. Press and hold until the display turns on.
█
Delete/Terminate Handset
This function allows you to delete a handset that is registered
to the base. To delete/terminate a handset:
1. Press under the word Menu on the screen to display
the main menu list.
2. Press up or down to scroll to BS Settings and then
press under the word Select.
3. Press under the word Select to select Delete HS.
The display will show PIN?
4. Enter the PIN (the default PIN is 0000) and then press
under the word Select. If the PIN is validated, you will
see a list of registered handsets.
5. Press up or down to scroll to the desired handset
that you would like to delete and press under the
word Select. The selected handset will no longer be
registered to the base.
Note : If you selected the current handset or a non-registered
handset, a warning tone will be heard.
BASIC PHONE FUNCTIONS