Citronic CSL-SERIES User Manual
Page 6
CSP & CSL-series User Manual
Graphic Equalizer
The main EQ is a stereo 7-band graphic equalizer, offering refined audio
spectrum shaping and feedback control for live mic situations.
15. EQ sliders.
Each slider controls a boost or cut of up to 12dB
centred at the specified frequency.
DSP Effects Engine
CSP and CSL series mixers each have an internal 24-bit DSP processor for
audio effects, as detailed on the DSP Table (on the following page)
16. 6-segment LED Indicates overall input level to DSP
17. Program display Indicates selected program (see table on next page)
18. TAP
Press once to switch the rotary control (27) to PARAMETER 2.
Tap the TAP button rhythmically more than twice to set a tempo for time effects
An LED to the left of the TAP switch flashes to indicate time intervals
19. PROGRAM
Turn this rotary encoder to select a program.
/PARAMETER
The numerical display will flash the selected program number.
Press the encoder to confirm the selection, the display will stop flashing & the selected program will be active.
Press the encoder again and a dot will appear in the display indicating PARAMETER 1. Turning the encoder will
change PARAMETER 1 for the selected program as detailed in the DSP Table on the following page.
Pressing the TAP button (26) will switch to PARAMETER 2 and then turning the encoder will change
PARAMETER 2 for the selected program.
These parameter changes are stored for when the program is selected in future.