Citronic CSL-SERIES User Manual
Page 2
CSP & CSL-series User Manual
Caution: Please read this manual carefully before operating
Damage caused by misuse is not covered by the warranty
Introduction
Thank you for choosing a CSP/CSL mixing console as part of your professional sound system. This product has been
developed to provide a wide range of facilities for professional and reliable sound reinforcement. Please read and keep
this manual to achieve the best results from your purchase and avoid damage through misuse.
Package Contents
CSP powered or CSL passive mixing console
Mains lead(s)
User manual
If you find any accessory is missing or the product has arrived with any problems, please contact your retailer at once.
This product contains no user-serviceable parts, so make no attempt to try to fix or modify this item yourself as this will
invalidate the warranty. We recommend you keep the original package and proof of purchase for any possible
replacement or return issues.
Warning
To prevent the risk of fire or electric shock, do not expose any of the components to rain or moisture.
Avoid impact or heavy vibration to any of the components.
No user serviceable parts inside - refer servicing to qualified service personnel.
Safety
Please observe the following warning conventions
CAUTION: RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this
unit
This symbol indicates that there are important operating and
maintenance
instructions in the
literature accompanying this unit.
Ensure that the correct mains lead is used with adequate current rating and mains voltage is as stated on the unit
Avoid ingress of water or particles into any part of the housing. If liquids are spilled on the console, stop using
immediately, allow the unit to dry out and have checked by qualified personnel before further use
Do not cover or obstruct cooling vents
Warning: this unit must be earthed
Placement
Keep the console out of direct sunlight and away from heat sources.
Do not place heavy objects on top of the control surface
If rack-mounting, use the correct rack-ears and ensure adequate support for the weight of the product.
Allow adequate space for air-flow and keep the console away from damp or dusty environments.
Cleaning
Use a soft dry or slightly damp cloth top clean surfaces of the console
A soft brush can be used to clear debris from between controls without damaging them
To avoid damage, do not use solvents to clean the components