Citronic CLP1200 - Manual (Page 8)

170.880UK User Manual
35. 2 TRACK INPUT Left + Right RCA connection for auxiliary input of a playback device (e.g. CD or mp3)
This can be routed to ST1 or main outputs (see 54 below) and is governed by the
2TK/PC rotary level control (52)
36. 2 TRACK OUT Left + Right RCA connection for main mix output to a recording device.
This output is pre-master-fader (unaffected by main Left + Right faders)
37. FX / AUX SEND Unbalanced jack outputs from FX SEND or AUX SEND routes.
The mix is governed by FX and AUX levels from each channel.
38. PW AMP L+R Left + Right 6.3mm jack inputs to the main power amp section. This enables the
CLP1200 to be used purely as a power amplifier without the mixer section.
In addition, connecting MAIN OUTPUTS (30, 31) as a stereo send and using the PW
AMP inputs as a stereo return allows external processing equipment to be patched in (or
inserted) before the power amplifier section.
MPR Media Player/Recorder
39. SD card slot Insert SD or SDHC card with
compressed audio files here
40. USB port Insert USB storage device with
compressed audio files here
41. IR receiver Receiver for MPR remote
42. MPR controls Transport and recording
controls for MPR section
as shown below
Press briefly for previous track. Press and hold for reverse search
Press briefly for next track. Press and hold for forward search
Press to record main output to media
Press to play or pause current track
43. Display Digital display with track and play status information
44. MPR LEVEL Rotary output level control for media player/recorder
45. MPR Route
MPR Route select. If not pressed in, the MPR output is routed through ST2 channel
ST2 - L/R