Daiwa SEABORG-500Fe - Manual (Page 31)

29
Functional setting operation
(10. Display recalibration)
Display revision
You can recalibrate the counter should it not indicate an accurate depth compared to depth markings
on your line.
Example below is the case in which, though the counter shows
103 m, color markings on the line indicate 100 m.
1. Press MODE BUTTON six times to show on the display real
fishing time and total winding length.
OFF
MAX
3
4. After 100.0 is reached, then press the MODE BUTTON to
return to depth display.
With this procedure, the inverse counter is reset. In the revised
display, pressing of the RESET BUTTON changes the reading
back to the unrevised value.
3. Move the power lever to change the displayʼs reading to 100.0 .
(Occasionally, for the revision rate, the exact number cannot be
attained.)
2 . Press MODE BUTTON and RESET BUTTON at the same time
for 2 seconds.
This displays revision display.
Depth counter
1
4
2