C. Crane BC345CRS User Manual
Page 13
Number Key/Knob
What it does
13
L/O FM1
In Scanner mode:
-Press to lock or unlock a channel memory in SCAN (HOLD)
or PROGRAM mode.
-Press to set or clear the frequencies in the skip Frequency
list in the Limit Search (HOLD) and Service Search (HOLD)
modes.
In AM/FM mode, press to select the FM1 memory bank.
In Service Select mode: Press to select the FIRE/EMS service.
Press and hold to unlock all registered channels or frquencies
in the following modes:
-Scan Hold (unlock all registered channels in the selected
bank)
-Program
-Service Search Hold
-Limit Search Hold
14
DELAY/FM2
-In Scanner mode, press to turn the delay option on/off.
-In AM/FM mode, press to select the FM2 memory bank.
-In Service mode, press to select AIR service.
15
PRI/MEM
-In Scanner mode, press to set a Priority channel for Scan
Hold mode and Program mode.
-In Program mode, press to set the Priority channel setting. In
SCAN and SCAN HOLD, press to set Priority Scan on or off.
-In AM/FM mode, press to select Memory mode to allow quick
channel recall using the 0-9 keys.
-In Service mode, press to select HAM service.
16
SVC/DIR
-In Scanner mode press to change to Service Search mode.
-In AM/FM mode, press to change to Direct Entry mode
to allow channel frequency selection using the up / down
arrows or 0-9 keys.
-In Service mode, press to select MARINE service.
17
MODE Switch Use to select the desired mode: AM/FM; Weather; Scanner.
(Slide switch must be set to Clock)
13