Radio identification – C. Crane CCPKTR User Manual
Page 6

1. Power button / Sleep Timer
To turn the radio “ON” just press the red button. To use the Sleep
Timer, press and hold the red button. The Sleep Timer will
automatically shut off the radio after the set amount of time expires.
The display will cycle through minutes 90, 60, 30, 15, 120, and OFF.
Release the power button to activate the sleep setting you desire.
The radio will remember your last Sleep Timer setting the next time
you use it.
2. Earphone Jack / External FM Antenna Jack (Included)
To listen using earphones, adjust the switch on the left side of the
radio to “Stereo” or “Mono” position. When earphones are plugged in,
they become an external antenna for FM, even when the side
switch is in speaker mode. The included external FM wire antenna
will also connect to this jack for even better reception in speaker
mode.
3. Volume Control
Rotate to adjust volume.
4. Tuning Buttons
Press once quickly to tune to the next frequency increment. Press and
hold for 1-second to automatically tune to the next strong station. Hold
continuously to cycle through the whole band.
5. Station Memory Buttons 1-5
Save your favorite stations to memory buttons. To save a station,
press and hold any memory button for 2-seconds while the station is
playing. To play a saved station, press the same button once quickly.
See page 9 for secondary functions
6. Speaker
To enable speaker, adjust the switch on the left side of the radio to
the “Speaker” position. The Speaker icon will show on the display.
CCPocket
Page 6
Radio Identification