C. Crane SWPR - Manual (Page 14)

Page 14 CC SW Pocket
LIGHT
Pressing the “LIGHT” button will give you
about eight seconds of light on the display.
DISPLAY button
The DISPLAY button works in two ways:
1. When the radio is “on”
the LCD display
normally shows the frequency. Pressing
the “DISPLAY” button will toggle the dis-
play through “ALARM TIME”, “TIME” of
day, and “SLEEP” timer status. It will show
the minutes left on the “SLEEP” timer or
“on” if the sleep timer is not being used.
2. When the radio is “off”
the LCD display
normally shows the time of day. Pressing
the “DISPLAY” button will toggle the dis-
play through “ALARM TIME”, tuning steps
for AM, and your choice of 12 or 24 hour
clock format. While the radio is “off”, you
can change from 12 hour to 24 hour clock
format by holding the “DISPLAY” button
for five seconds. Change it back using the
same method. See O “BAND” button on
page 16 to change tuning steps for AM.
Features and Operation Explained
E
R