BendixKing IN-862A System RDR-2100 - Manual (Page 63)

Effective Date: 9/98 RDR 2100 Pilot's Guide: Rev 1
59
Options
AUTO STEP SCAN
Auto Step Scan causes the antenna tilt to sequentially step
in 4
° increments. This allows the pilot to Vertical Profile the
entire azimuth scan angle by simply watching successive
antenna scans. Auto Step Scan is entered by turning the tilt
adjust to +15
° or -15°. If the tilt angle is set to -15°, the fol-
lowing is the sequence of antenna tilt angles for each
azimuth scan:
-10
°, -6°, -2°, +2°, +6°, +10° ....+6°, +2°, etc.
If the tilt adjust is initially set to +15
°, the above sequence will
be reversed.
This will continue until the tilt adjust is moved to an angle
other than ±15
°.
RDR 2100 PG 3/12/07 3:45 PM Page 59