BendixKing KLN 94 - Quick Reference Guide - Manual (Page 6)

PAGE MESSAGES Continued
RAIM Position Error
Cross Check Position--RAIM has detected a problem with a satellite.
Compare the GPS position with other on-board navigation equipment.
Redundant WPTs in FPL
Edit Enroute WPTs
As Necessary--Examine the active flight plan and remove those way-
points that occur both in the en route and the approach or DP/STAR sec-
tions of the flight plan.
SCRATCHPAD MESSAGES
Messages that could appear during approach operations. Refer to the
Pilot's Guide for a complete list of messages.
CRS
XXX°--When in OBS mode, manually adjust the HSI or CDI course pointer
to the prescribed value to provide direct-to navigation.
Fpl Is
Full--The KLN 94 cannot add any more waypoints to the flight plan.
Invalid
Add--You cannot add waypoints to the approach sequence.
Invalid
Del--You cannot delete waypoints from the approach sequence.
No Appr
at Apt -- An airport has been entered on the PROC 2 page that does not
have an approach in the database.
No Apr In Fpl --No approach has been loaded into the flight plan when
the APR ARM button is pressed.
No Intcpt --The aircraft's actual track does not intersect with the DME arc.
Alter course so that the actual track does intercept the arc.
D Base Expire --A reminder that the database is out of date.
NAV 4 (MOVING MAP) PAGE TIPS
• To display the NAV 4 page when on any other page, press
R
or
M
.
• To scan through waypoints in scanning window, pull out and turn the
right inner knob. Active flight plan waypoints are displayed in green.
Non-flight plan waypoints are displayed in white. With desired waypoint
displayed in scanning window, press
D
and
F
to go direct-to the
selected waypoint OR press
F
to display the waypoint page for the
selected waypoint (ORS 02 and higher).
- 6 -
D
KLN 94 Quick Ref R2 4/3/02 1:55 PM Page 1