GiiNii GD-250 - Manual (Page 18)

17
4.2 Menu Tree
Refer to the below table for details on menu items and available menu options.
-
Menu option Description Available option
Resolution Set the desired video resolution.
1080FHD
720P 60FPS
720P 30FPS
WVGA
VGA
Loop recording 2 Minute to 5 Minute Off/2 Minute, 3Minute or 5 Minute
WDR Wide Dynamic Range ON
Exposure
+2.0, +5/3, +4/3, +1.0, +2/3, +1/3, +0.0,
-1/3, -2/3, -1.0, -4/3, -5/3, -2.0
Motion Detection
Enable/Disable the motion detection. If this
function is enabled and the power off
button is pressed, the system alert message.
Under motion detection mode, the device
will automatically start recording when any
object movement is detected.
On/Off
Record Audio Recording with audio On/Off
Date Stamp Recording with date On/Off
G-sensor Adjust G-sensor sensitivity Off/High/Middle/Low
Date/Time Set the date/time
Press
Ÿ/ź
button to adjust the
value, press the REC button to
switch
the field and confirm.
Key Tone Button Key Sound OFF/NO
Language Set up language
English, French, Spanish, Portuguese,
Deutsch, Italian, Simplified Chinese,
Traditional Chinese, Russia, Japanese
AV Out Set up AV Out mode PAL/NTSC
Frequency Adjust light frequency 50Hz/60Hz
Screen Saver Set up Screen Saver Off/3 Minute, 5 Minute or 10Minute
Format
Format the memory card. Warning: Once a
format has been initiated, ALL content on the
micro SD card will be deleted CANNOT be
restored or recovered.
OK/Cancel
Default Setting Reset all options to the factory default
settings.
OK/Cancel
Firmware version Showing firmware version