GiiNii GD-250 - Manual (Page 13)

12
3 Using the Dash Cam
3.1 Recording Videos
3.1.1 Record videos while driving
When the vehicle engine starts up and the Automatic Record function is enabled, the Dash Cam
automatically turns on and starts recording.
Recording will automatically stop when the engine is switched off.
Or, press the REC button to stop recording manually.
Note:
On some cars, the recording will continue when the engine is switched off.
If this happens, do one of the following:
- Manually turn off the cigarette lighter socket if possible..
- Remove the car adapter from the cigarette lighter.
3.1.2 Manual Video Recording
1. Press the REC button to start recording.
2. Press the REC button to stop recording.
Note:
1. One video file is saved for every 2, 3 to 5 minutes of recording.
2. The device saves the recording on the memory card. If the memory card capacity is full, the
oldest file in the memory card is overwritten.
3.1.3 Emergency Recording
During normal video recording, if vehicle is engaged in unusual collision or impact, Emergency recording
will start automatically. However, to turn on manual Emergency Recording, simply press the M button to
begin emergency recording mode. The “Emergency” message will be displayed immediately on the
upper left corner of the screen, and the recorded file will be continuous and protected from being
overwritten.
To stop the recording, press the REC button.