Clarity 430 - Manual (Page 11)

Headset Jack
You can use this telephone hands-free when
you install a 2.5 mm headset (purchased sep-
arately). To install, plug the headset into the
HEADSET JACK at the top of the handset.
While in headset mode, the volume of
headset is controlled by the telephone and
the handset’s earpiece and microphone
are disconnected.
Ordering a Headset: In the event you
wish to purchase a headset for your Clarity
430, please contact Plantronics at
1-800-544-4660 for location near you.
We recommend using the Plantronics
M110 or M130 headset.
Belt Clip
You may choose to use the optional belt
clip with your handset.
1. To attach slide belt clip down onto
groves. Press the tabs on the belt
clip into the slots to attach.
2. To remove, lift one side of the belt
clip with your thumbnail and
push back.
Hearing Aid Compatibility
The handset has a special coil inside of it to
couple the sound to hearing aids equipped
with T-Switches/T-Coils.
Quick Reference Guide
A pullout quick reference guide is located
on the bottom of your C430. It will allow
you to quickly reference key operations of
your phone and also record the frequently
dialed numbers and emergency numbers
you may have stored into your telephone.
Getting Started
E
N
G
L
I
S
H
11
C430Eng_2.6.04 2/7/04 4:39 PM Page 11