Sangean UCR-100 (V1) - Manual (Page 10)

9
Alarm setting:
1. Touch the key (or ), to check the Buzzer alarm time
(or Radio alarm time). The display will show back the present
time after 7 seconds. Or you can touch the same key to go
back to the present time.
2. While the display is showing the alarm time (after the key or
is touched), touch the key for 2 seconds to enter
the alarm time adjustment.
3. Now the hour digits are flashing. Touch the key and
to adjust the hour.
4. Touch the key then the minute digits are flashing.
Touch the key and to adjust the minute.
5. If you are setting the Buzzer alarm, press the key to
complete the setting. If you are setting the Radio alarm,
touch the set key, adjust the alarm radio frequency by touching
the TUNING UP/DOWN keys, then press the key to
complete the setting.
* When the radio station signal is too weak when the Radio alarm
is activated, the alarm will become Buzzer alarm.