Sangean RCR-4 (V1) - Manual (Page 16)

15
How to deactivate alarms
1. Touch the ALARM key then touch UP or Down key to select
the alarm (1, 2, 3, 4, or 5) which you would like to deactivate.
2. Touch the SET key, and then touch UP or Down key to set the
alarm to be “OFF”. (The LED lights will be off for the alarms
which are turned off)
Snooze function
1. To interrupt the alarm signal (radio alarm or buzzer alarm),
touch the SNOOZE key, and the alarm will stop for 5 minutes
and the display will flash the letter “Z”. The snooze function can
be repeat during the 1 hour period of the alarm is sounding.
2. Touch the POWER key to cancel the snooze and alarm function.
Nap timer
It is a countdown alarm which will sound after the time period that
you set. And the time period can be set from 10 to 120 minutes in
10 minutes steps.
1. Touch the NAP key until the required time period is shown on
the display.
2. While the Nap timer is alarming, the display flashes the letter “N”.
3. To silence the alarm, touch the POWER key.
4. To cancel the Nap timer before the time Nap time is elapsed,
touch the NAP key until the OFF word is appeared on
the display.