Sangean DT-F1 (R1) - Manual (Page 6)

Lock switch
The Lock switch is used to prevent
unintentional operation of the radio.
Set the Lock switch located on the right side
of the radio to the Lock position. The power
and all other buttons will be disabled, this will
prevent accidental operation when the radio
is packed in a suitcase or travel bag.
To prevent accidental operation of the
controls when the radio is switched on, set
the Lock switch to the Lock position, the
symbol will appear in the display. To release
the Lock switch, move the lock switch to the
down (unlock) position, the symbol will
be removed from the display.
Earphones
Plug the earphones supplied into the
earphones jack located on the top of the
radio.
4
GB