Sangean DT-F1 (R1) - Manual (Page 10)

Storing stations in preset memory
There are 9 preset memories each on area 1
and area 2 (like page 1 and page 2 on some
of car stereo receivers) in total 18 preset
memories for this radio.
Turn on the radio, tune to the desired
stations using scan and manual tuning as
previously described. Press the Memory
button (AREA/M.) 2, the display will flash
Preset, press PRESET button 3 to select
memory position then press AREA/M again
to complete the memory preset.
To change PRESET area from area 1 to area
2 and vice versa, press AREA/M for more
than 3 seconds, display AREA will flash the
change, continue pressing for another 2
seconds until flash stops. The Preset area
now is changed (from Area 1 to Area 2 and
vice versa).
GB
8