Sangean DT-210 (R1) - Manual (Page 10)

GB
8
Change AM (MW) band tuning step
( available only on DT-210/V not for
LW version )
In Europe and other parts of the world, AM
(MW) tuning step are 9 kHz, in America the
AM tuning step is 10 kHz.
To change the AM tuning step from 10 kHz to
9 kHz, proceed as follows,
1. Press Tuning Down button then the power
button to switch on the radio, the radio
will be changed into 9 kHz tuning step on
AM band.
To change the AM tuning step from 9 kHz to
10 kHz, proceed as follows,
1. Press Tuning UP button then Power
button to switch on the radio, the radio will
be changed into 10 kHz tuning step on AM
band.