Sangean DPR-65 (V1) User Manual

Page 17

Dynamic Range Control settings – DAB

Dynamic Range Control (also known as DRC) can make quieter sounds
easier to hear when your radio is used in a noisy environment.

1. Press the Power On/Off button to switch on your radio.

2. Press and hold the Info button. The display will show “Station list”.

3. Press the Tuning Up/Down buttons until the display shows
“DRC value”.

4. Press and release the Select button to enter the setting.

5. Press the Tuning Up/Down buttons to select the required DRC
setting (the default is 0).
DRC 0 – DRC is switched off, Broadcast DRC will be ignored.
DRC 1 – DRC is set as sent by broadcaster.
DRC 1/2 – DRC level is set to 1/2 that sent by broadcaster.

6. Press and release the Select button to confirm the setting. The display
will return to normal tuning mode.

Note:
Not all DAB broadcasts are able to use the DRC function. If the
broadcast does not support DRC, then the DRC setting in the radio will
have no effect.