beautypg.com

Sangean DPR-65 (V1) User Manual

Page 10

background image

9

Using the AC adaptor

Your radio is supplied with a Mains Adaptor.

1. Place your radio on a flat surface.

2. Insert the adaptor plug into the DC socket located on the left hand
side of your radio.

3. Plug the adaptor into a mains socket outlet. Whenever the adaptor is
used with the radio, it will take power from the mains rather than from
the batteries.

The AC adaptor should be disconnected from the mains supply and the
radio when not in use.

IMPORTANT:
The mains adaptor is used as the means of connecting the radio to the
mains supply. The mains socket used for the radio must remain
accessible during normal use. In order to disconnect the radio from the
mains completely, the mains adaptor should be removed from the mains
adaptor socket outlet completely.

Lock switch

The lock switch is used to prevent unintentional operation of your radio.

1. Set the Lock switch located on the side of your radio to the “Lock”
position and the power and all other buttons will be disabled.
This will prevent accidental operation when your radio is packed in a
suitcase or travel bag.

2. To release the lock, slide the Lock switch down to the “Unlock”
position .

IMPORTANT:
‘Key Locked’ will show on the display if pressing the buttons when the
radio is locked. The radio will not be able to be turned on if locking the
radio when it’s in power off mode.