beautypg.com

Using the remote transmitter (rs900), Remote engine control – Crimestopper Security Products RS901 User Manual

Page 3

background image

USING THE REMOTE TRANSMITTER (RS900)

The transmitter supplied with this system has Four (4) buttons / channels. The button configuration is Factory-set
and unchangeable. (RS901 model does not include remote transmitters: For add-on / OEM use only)

#3

#1

TRANSMITTER BUTTONS

#2

#4

START

LOCK

TRUNK

REMOTE

START

UNLOCK

#5

CAR 1-2

REMOTE ENGINE CONTROL

REMOTE ENGINE STARTING - SUCCESSFUL START:
1) Press and release the remote start button. (For RS901 models, activate Green Start input wire.)
2) Parking lights flash once, then turn on solid, Ignition/Acc On turn on.
3) After a few seconds the Starter Motor engages, Parking lights and Acc circuits will turn off while cranking.
4) Engine Starts and Runs. Parking Lights and Acc turn back on, Doors Lock.
5) Engine will remain running for programmed run time until reset with Brake pedal. If needed, the engine can be

turned off with remote transmitter by pressing and releasing the Start button. (For RS901 model, activate the Green
Start input wire.