Sangean DPR-32 (V1) User Manual
Page 11
GB
0
DRC Value
Dynamic Range Control (DRC) feature can make quieter sounds
easier to hear, especially when your radio is used in a noisy
environment. This function only works within the DAB+ band.
DRC 0: DRC is switched off, broadcast DRC will be ignored.
DRC 1/2: DRC level is set to /2 that sent by broadcaster.
DRC 1: DRC is set as sent by broadcaster.
System Setup press the jog wheel to select from following settings options:
Sleep: your radio can be set to turn off after a preset time has
elapsed. The sleep timer setting can be adjusted between 5 and
20 minutes in 5 minute increments.
Contrast: turn and press in the jog wheel to select required LCD
display contrast. Display contrast will change accordingly.
Factory reset: press in and turn the jog wheel to select YES
or NO. Select YES to erase all saved settings, station lists and
favorites. All settings will revert to factory default.
SW Version
press the jog wheel to view software version installed in the radio.
Back
press the jog wheel to go back to the previous page