Sangean DDR-33+ (R1) User Manual

Page 35

Bass control

1. Press the On / Standby button to switch on the radio. If necessary
press and release the Mode button to put the radio into DAB or
FM mode.

2. Press and release the Menu button to enter the setup menu.
“MANUAL” will appear on the display.(”MANUAL” won’t appear on
the display if you put the radio into FM mode.)

3. Press the Tuning Up or Down button until “EQ” appears on
the display. Press and release the Select button.

4. Press the Tuning Up or Down button until “BASS 0” appears on
the display.

5. To adjust the bass setting press and release the Fast-forward button
or Rewind buttons until the desired level is displayed. Press and
release the Select button, and then your radio will return to the
normal radio display mode.

To quickly cancel the effect of the treble or bass settings press
the Equalizer button until “Flat” appears on the upper line of the
text display. The treble and bass settings will be remembered for
the next time that you wish to adjust them.

Note:
By using the EQ button on the remote control, you can omit the above
1 - 3 steps and only follow 4th and 5th steps for the bass control.